1. Do not move freely
After the RO reverse osmosis water purifier has been installed, do not move it arbitrarily with large movements, as large movements may cause parts to loosen or the water inlet, outlet, and wastewater outlet to loosen. The consequences of these loosening are definitely water leakage, but it is still good to detect the leakage in a timely manner. However, if not detected in a timely manner, causing the house to be soaked, it will cause immeasurable losses.
2. Popularization of knowledge on filter element replacement
The replacement time of the filter element of a water purifier usually has a reference value, but this reference value can only be used as a reference because the water quality and usage frequency of each household are different.
For households with good water quality and low usage frequency, the filter element in the RO reverse osmosis water purifier is more durable.
For households with poor water quality and high usage frequency, the filter element of RO reverse osmosis water purifier is not durable, and the replacement frequency should naturally be higher.
3. Method for determining the replacement time of filter elements
Many water purifiers nowadays come with built-in core replacement reminders, so it’s very worry free. Once reminded, replacing them will never go wrong.
If you want to be more precise, you can use a TDS pen to measure. If the measured value is within 50, you can drink it with peace of mind and there is no need to replace the filter element temporarily.
4. Components should also be inspected regularly
Although components are not the core of water purifier operation, they are also a “good helper” for water purification and filtration. If it ages or falls off, it can also affect the normal use of the water purifier.
Cleaning of RO reverse osmosis water purifier
1. Replace the filter element in a timely manner
Replace the filter element in a timely manner to ensure its cleanliness and ensure the quality of drinking water.
2. Flushing
Whether it is a new water purifier or a water purifier that has just replaced its filter element, it is necessary to let 5-10 minutes of water clean the protective liquid on the membrane.
3. Appearance cleaning
Cleaning work for daily machine maintenance.
Filterpur water purifier is one of the few brand machines in the market that still insists on producing a “universal filter element”.
This water purifier is a 3:1 waste water purifier that uses pure water to wash the RO membrane, applies for patent technology, is affordable and more water-saving.
Unlike traditional water purifiers that use tap water for flushing, our pure water flushing RO membrane has a longer service life and less wastewater.
It is the only one on the market that can achieve water purification of 3 and wastewater treatment of 1. And it does not damage the service life of the membrane, saving more than 10 times water compared to other brands of water purifiers!
It has an 800G flow rate and a pure water capacity of 2.11L/min. Limited kitchen space requires caution. Adopting a universal filter element, the cost of replacing the filter element is low in the later stage.
The design of single and double outlet water can be selected according to needs.
Visual panel,display the filter life and TDS light.
Post time: Apr-12-2023