Sau nawa ake maye gurbin sinadarin tacewa? kuma tsawon lokacin da ake ɗauka na tsawon abubuwan tacewa daban-daban?
1. PP auduga
Za a iya cewa audugar PP tana da mafi ƙarancin tsawon rai fiye da duk abubuwan tacewa, kuma gabaɗaya yana da mahimmanci a maye gurbinta cikin lokaci bayan watanni 6-12 na amfani. Saboda wannan sinadarin matatar shine mafi yuwuwar gurɓata, domin a kiyaye ruwan da ke fitowa daga mai tsarkake ruwa, dole ne a maye gurbin sinadarin matatar da kyau.
2. RO membrane
Yawancin na'urorin tsaftace ruwa masu inganci suna amfani da membranes na RO a matsayin abubuwan tacewa. Fa'idar wannan sinadarin tacewa ita ce yana da tsawon rai. A cikin yanayi na yau da kullun, ana iya maye gurbinsa sau ɗaya a kowace shekara 2-3.
3. Tacewa ta Ultra
Cire ƙwayoyin halitta masu yawa, colloids da ƙwayoyin cuta daga ruwa. A ajiye ma'adanai masu amfani, waɗanda suka dace da amfani a yankunan da ke da ingantaccen ingancin ruwa, kuma ana maye gurbinsu na tsawon watanni 18-24.
4. Carbon da aka kunna
Matatar carbon da aka kunna tana ɗaya daga cikin matatun tace ruwa da aka fi amfani da su kuma ana buƙatar a maye gurbinta sau ɗaya a shekara.
Ana iya amfani da shi a cikin na'urar rarraba ruwa ta Countertop da kuma na'urar tsarkake ruwa ta ƙarƙashin sink
An daidaita wannan matatar da allon ruwa da aka tsara wanda zai iya maye gurbin matatar kamar yadda aka saba lokacin da aka kunna injin. A lokaci guda, matatar matakai 2 na iya cimma tasirin tacewa na matatar matakai da yawa
Haɗuwar matattara guda 2: 1) PAC+PRO 2) RO+HPPC, da sauransu.
Matsakaicin galan: 800G
Tacewar membrane ta Micron Ro 0.0001
Matatar RO Tace digirin tacewa na ka'idar zai iya kaiwa 0.001-0.0001 micron yana ƙin ƙwayoyin cuta da ƙarfe mai nauyi a cikin ruwa yadda ya kamata.
Kayan aiki: DOW / CSM
Rayuwar sabis na tacewa: watanni 24-36
Ka'idar aiki
Bayan ruwan famfo ya shiga, yana ratsawa ta cikin membrane na RO, grid ɗin ruwa mai tarin yawa, da kuma grid ɗin samar da ruwa.
Ruwa mai tsarki da ruwa mai ƙarfi suna fitowa daban-daban, babu gurɓatawa
